For full kit description please see conversion page.

TMD Honda K20 Elise preparation kit: £285.00 + VAT (£334.88 inc. VAT)
(Approximate current lead time: 2 to 3 weeks) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

1 x Installation manual (cd version)
1 x Wishbone modification (return basis)
1 x K20 ancilliary drive belt
1 x Clutch adaptor pipe
1 x Hose hydraulic fitting
1 x Dowty washer to suit
1 x Machined inlet manifold blanking plug
1 x Temperature sender thread adaptor
1 x CNC sump baffle assembly
1 x Tube liquid gasket for sump refitting
(All parts plated or powdercoated where required)

_______________________________________________________________________________________________________________

TMD Honda K20 Elise mounts and fasteners kit: £815.00 + VAT (£957.63 inc. VAT)
(Approximate current lead time: 3 to 4 weeks) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

1 x Nearside engine mount
1 x Nearside mount bush collar
1 x Offside engine mount
2 x Engine mount spacers
1 x Torque steady front chassis mount bracket
1 x Torque steady front arm
1 x Torque steady rear chassis bracket
2 x Rear chassis bracket spreader plates (2 x thickness)
1 x Torque steady rear arm
2 x Torque steady bushes (fitted)
1 x Fastener kit
(All parts plated or powdercoated where required)
Please note: Engine mountings may not be suitable for aftermarket or Honda DC2 inlet manifolds.
_______________________________________________________________________________________________

TMD Honda K20 Elise fully built hybrid driveshafts: £669.00 + VAT (£786.08 inc. VAT)
(Approximate current lead time: 3 to 4 weeks) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

Custom built hybrid shafts built complete with 300M steel shafts, heavy duty boots and high temperature grease.
Please note: Guarantee only valid and fitment guaranteed if purchased with K20 mounting kit available above. Driveshafts must also be adequetely shielded from exhaust manifold heat for guarantee to remain valid.
Please note CV joints are supplied on an exchange basis.

_______________________________________________________________________________________________________________

TMD Honda K20 Elise stainless steel exhaust manifold: from £769.00 + VAT (£903.58 inc. VAT)
(Approximate current lead time: 2 weeks) - FREE UK Mainland P&P

Please select link pipe option

Decat pipe £769.00 Sports catalyst £969.00 Decat and sports catalyst £1,069.00

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

Includes stainless steel link/decat pipe which mates upto standard Elise exhaust system instead of the standard catalyst pipe (decat pipe is intended for off road use only).
1 x Stainless steel exhaust manifold optimised for naturally aspirated K20A2
1 x Decat link pipe
12 x Stainless manifold fasteners
2 x Manifold gaskets
Please note: Guarantee only valid and fitment guaranteed if purchased with K20 mounting kit available above.The manifold is only compatible with central silencer box exhaust systems (ie. standard Lotus, 2bular etc) and not off centre boxes (ie. Janspeed).

_______________________________________________________________________________________________________________

TMD K20 Elise decat/sports catalyst pipe: £159.00/£359.00 + VAT (£186.83/£421.83 inc. VAT)
(Approximate current lead time: 2 weeks) - FREE UK Mainland P&P
For previous customers wishing to have the option of both link pipes, please select from the list below:

Please select link pipe

Decat pipe £159.00 Sports catalyst £359.00

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

_______________________________________________________________________________________________________________

TMD Honda K20 Elise coolant and fuel kit: £459.00 + VAT (£539.33 inc. VAT)
(Approximate current lead time: 1 to 2 weeks) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

Please select hose colour

Black Red Blue

1 x Full set of silicon coolant hoses (please specify colour above)
1 x Full set of hose joiners and jubilee clips
1 x Crankcase breather hose
1 x Induction hose (0.5m)
1 x Length flexi hose
2 x Flexi hose fixtures
1 x Length edging strip
1 x Pack fuel fixtures
1 x Length fuel hose
1 x Fuel line T piece
1 x High flow standard fuel filter
1 x Fuel pressure regulator

(Upgrade to replacement billet cartridge filter available - please ask)

________________________________________________________________________________________________________________

TMD Honda K20 Elise gear linkage assembly kit: £645.00 + VAT (£757.88 inc. VAT)
(Approximate current lead time: 3 to 4 weeks) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

2 x Stainless stud bar
4 x Gear cable rod ends
2 x Gearshift assister springs
2 x Custom gear Cables
4 x Gear Linkage rod ends
4 x Bearings
1 x Gear linkage plate
1 x Rocker L/R
1 x Rocker fore/aft
2 x Linkage spacer
1 x Fastener kit
(All parts plated or powdercoated where required)
Please note: Linkage kit is supplied fully assembled.

_______________________________________________________________________________________________________________

TMD Honda K20 Elise conversion finishing kit: £235.00 + VAT (£276.13 inc. VAT)
(Approximate current lead time: 3 weeks) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

1 x Set of heatshield templates
25 x Repair washers
25 x Rivets
3 x Washer bottle bracket fasteners (S2 only)
4 x Anti vibration undertray spacers
1 x Large sheet G3A Cirrus heatshield
1 x Large sheet G1B Nimbus heatshield

_______________________________________________________________________________________________________________

TMD Honda K20 Elise installation manual: £29.00 + VAT (£34.08 inc. VAT)
(Approximate current lead time: 3 days) - FREE UK Mainland P&P

Please select vehicle

Series 1 Elise Series 1 Exige Series 2 Elise 340R

Printed, bound and laminated copy.
NOW INCLUDES WIRING DIAGRAMS, WISHBONE MODIFICATION DRAWING AND HEATSHIELD TEMPLATES!
Please specify Series 1 or 2 Elise above.
50% REFUNDED UPON PURCHASE OF A KIT AT A LATER DATE

________________________________________________________________________________________________________________

TMD Honda K20 Elise 'Full without electrical' kit: £3200 + VAT (£3760.00 inc. VAT)
(Approximate current lead time: 4 to 5 weeks)NOW WITH FREE UK Mainland P&P
Online payment not currently available for this item, please contact us for payment options.

1 x Installation manual (.pdf version)
2 x Fully built hybrid driveshafts
1 x Nearside engine mount
1 x Nearside mount bush collar
1 x Offside engine mount
2 x Engine mount spacers
1 x Torque steady front chassis mount bracket
1 x Torque steady front arm
1 x Torque steady rear chassis bracket
2 x Rear chassis bracket spreader plates (2 x thickness)
1 x Torque steady rear arm
2 x Torque steady bushes (fitted)
1 x Machined inlet manifold blanking plug
1 x Temperature sender thread adaptor
1 x Gear linkage assembly with rocker and bearings (fully assembled)
2 x Gear linkage spacers
2 x Gearshift assister springs
2 x Custom gear cables fitted with rod ends/balljoints
2 x Gear threaded adjusters with rod ends
4 x Anti rattle undertray spacers
1 x CNC sump baffle assembly
1 x Stark K20 coolant hose kit
1 x Flexi hose 13mm
1 x Fuel fittings
1 x Fuel hose
1 x T piece
1 x Fuel filter (standard)
1 x Fuel pressure regulator
1 x Ancilliary drive belt
1 x Clutch Adaptor Pipe
1 x Exhaust manifold decat
1 x Large sheet G3A Cirrus heatshield
1 x Large sheet G1B Nimbus heatshield
1 x 22 Piece fastener set
1 x Length cable edging strip
1 x Tap (return basis)
1 x Strip velcro
1x Tube liquid gasket
1 x Set heatshield templates
25 x M5 repair washers
25 x 5mm Rivets
3 x Washer bottle bracket rivets (S2 Only)
1 x Hydraulic fitting
1 x Dowty washer
1x Manifold gasket Lotus Style
1 x Manifold Gasket Stark
6 x Manifold bolts
6 x Manifold nuts
1 x Length thread tape
1 x DIY wishbone modification diagram (requires welding, for optional inclusion see below)
(All parts plated or powdercoated where required)
Please note CV joints are supplied on an exchange basis.

(Upgrade to replacement billet cartridge filter available - please ask)

____________________________________________________________________________________________

TMD Honda K20 Elise 'Full with Hondata' kit, please see here for full description: £3850.00 + VAT
(£4523.75 inc. VAT) (Approximate current lead time: 4 to 5 weeks)NOW WITH FREE UK Mainland P&P
Online payment not currently available for this item, please contact us for payment options.

Exactly as above 'full without electrical' kit but with the addition of a Hondata KPro ECU.
Please note, this ECU is NOT supplied with a map nor a modified wiring loom.
This option requires return of a donor Honda ECU for the upgrade as well as immobiliser deletion.

________________________________________________________________________________________________________________

Add sports Catalyst option to above kits ('Full', 'Full w/out electrical' and 'Lite'): £200.00 + VAT
(£235.00 inc. VAT)

Add wishbone modification to any of the above kits: £19.50 + VAT (£22.91 inc. VAT)
- This option is only required for Series 1 and some Series 2 vehicles, please ask for further details.
- Return postage will be charged unless purchased with a Full/Lite kit above.

Add oil cooler retaining kit for Series 1 Exige (includes sandwich plate and fittings/hose):
£72.95 + VAT (£85.72 inc. VAT)

For full list of options from custom-coloured powdercoating and hoses to transmission upgrades please Contact Us for a hassle free quote!